自动防盗盖铣字机

简单介绍了自动防盗盖铣字机的结构及工作原理，分析了该机的动力传输及各运动件间的动作配合。     

质量流量计与失重式给料器在PTA计量控制中的对比

失重式给料器基于单位时间内称量料斗内质量的减少值计算流量 ,其间歇进料的特性使它存在测量盲点 ;而扭矩式质量流量计基于扭矩和质量流量函数关系 ,使化工生产中固体散料 /粉料的计量控制实现了真正意义上的实时、连续计量控制     

PVC多种原料路线并存有利于低御风险

国际环境对我国PVC生产有明显影响,尽管国内PVC需求在向1000万t/a发展,搞PVC新项目依然存在巨大风险,为减少风险,国家应鼓励多种原料路线长期共存。     

粘钢技术在输水管竖井加固中的应用

１９７６年汛前发现响水潭水库输水管竖井圆筒底部与闸室连接处的下游出现环形水平裂缝，对此当年曾加固处理。１９８６年复查时，发现竖井原处又出现了类似的环形裂缝，并有新的发展，为确保工程安全，于１９９４年３月再次加固。此次加固采用先止水，后粘钢板的加固方法，收到很好的效果。     

Experimental studies on characteristics of fire whirl in a vertical shaft

An internal fire whirl can be generated readily in a tall shaft model with appropriate gap width at one corner. Experimental study was carried out to investigate the relationship between the characteristics of an IFW and the corner gap width in a 9‐m‐tall vertical shaft model. The vertical shaft had a 2.1 m by 2.1 m square section with gasoline pool fire of different diameters burning inside. The gap width was varied to investigate its impact on fire whirl characteristics, such as flame development, swirling intensity, flame height, flame temperature, and heat release rate of the gasoline pool fire. Vigorous flame swirling motions were generated when the ratio of the gap width to the shaft section perimeter was within the range 0.16 to 0.21. From the flame streamline angle, it was observed that the swirling component was much stronger than buoyancy component near the bottom of burning region. The swirling component decreased and became roughly the same as buoyancy near the middle. Finally, it diminished to being much weaker than buoyancy near the top of the fire. These observations suggest that the Froude number Fr decreased from a large number to 1, and then continued to decrease to 0.     

An experimental approach towards increasing mechanical durability of extruded fish feed in the drying process

Mechanical durability of extruded fish feed must be optimized to lower economic losses as well as emission of organic matter to aquatic environments. The glass transition hypothesis for viscoelastic biopolymers is demonstrated and confirmed experimentally to be valid for extruded fish feed pellets. It is proposed and demonstrated that it is important to avoid early glass transition onset, to optimize the obtained mechanical durability. From the proposed glass transition hypothesis, immediate process relevance to the pre-drying transport mechanism is demonstrated. Furthermore, measured mechanical durability is found to range from 1.5 to 5.0% loss, for different combinations of drying parameters.     

赖氨酸生产与应用发展概况

目前 ,我国的赖氨酸生产能力超过 10万t/a,实际生产量只有 3万t/a。主要原因是我国的赖氨酸生产不稳定 ,产品成本高 ,品种单一 ,使得进口产品不断冲击国内市场 ,以致于国内现有的生产装置不能满负荷运转。近几年 ,国内赖氨酸新建和扩建装置不断增多 ,但进口产品量也不断增加 ,这一点非常值得注意。     

HZ3MZ223滚子轴承内圈挡边磨床改造

针对小型圆锥轴承市场不断萎缩的现状,将闲置的加工小型圆锥轴承挡边的HZ3MZ223滚子轴承内圈挡边磨床加工范围变大,用于加工大型圆锥轴承挡边,此类轴承市场前景广阔。     

Methane production,rumen fermentation,and diet digestibility of Holstein and Jersey dairy cows being divergent in residual feed intake and fed at 2 forage-to-concentrate ratios

Improving feed efficiency of dairy cows through breeding is expected to reduce enteric methane production per unit of milk produced. This study examined the effect of 2 forage-to-concentrate ratios on methane production, rumen fermentation, and nutrient digestibility in Holstein and Jersey dairy cows divergent in residual feed intake (RFI). Before experimental onset, RFI was estimated using a random regression model on phenotypic herd data. Ten lactating Holstein and 10 lactating Jersey cows were extracted from the herd and allocated to a high or low pre-experimental RFI group of 5 animals each within breed. Cows were fed ad libitum with total mixed rations either low (LC) or high (HC) in concentrates during 3 periods in a crossover design with a back-cross and staggered approach. Forage-to-concentrate ratio was 68:32 for LC and 39:61 for HC. Cows adapted to the diets in 12 to 24 d and feces were subsequently collected on 2 d. Afterward, gas exchange was measured in respiration chambers and rumen liquid was collected once after cows exited the chambers. Pre-experimental RFI was included in the statistical analysis as a class (low and high RFI) or continuous variable. Methane per kilogram of dry matter intake (DMI) was lower for Holsteins than Jerseys and the response to increased concentrate level was more pronounced for Holsteins than Jerseys (27.2 vs.13.8%); a similar pattern was found for the acetate:propionate ratio. However, methane production per kilogram of energy-corrected milk (ECM) was unaffected by breed. Further, total-tract digestibility of neutral detergent fiber was higher for Jerseys than Holsteins. For RFI as a class variable, DMI, methane production regardless of the expression, and digestibility were unaffected by RFI. For RFI as a continuous variable, DMI was lower and methane per kilogram of DMI was higher for cows with negative (efficient) than positive (inefficient) RFI values, and neutral detergent fiber digestibility was higher for Holsteins with negative than positive RFI values, but not for Jerseys. Daily methane production and methane per kilogram of ECM were unaffected by RFI. In conclusion, methane per kilogram of DMI of Jerseys was lowered to a smaller extent in response to the HC diet than of Holsteins. When pre-experimental RFI was used as a continuous variable, higher methane per kilogram of DMI was found for cows with negative RFI than positive RFI values, but not for methane per kilogram of ECM. These findings call for validation in larger studies.     

基于混合微分进化算法的生化过程动态参数估计(英文)

Determination of the optimal model parameters for biochemical systems is a time consuming iterative process. In this study, a novel hybrid differential evolution (DE) algorithm based on the differential evolution technique and a local search strategy is developed for solving kinetic parameter estimation problems. By combining the merits of DE with Gauss-Newton method, the proposed hybrid approach employs a DE algorithm for identifying promising regions of the solution space followed by use of Gauss-Newton method to determine the optimum in the identified regions. Some well-known benchmark estimation problems are utilized to test the efficiency and the robustness of the proposed algorithm compared to other methods in literature. The comparison indicates that the present hybrid algorithm outperforms other estimation techniques in terms of the global searching ability and the convergence speed. Additionally, the estimation of kinetic model parameters for a feed batch fermentor is carried out to test the applicability of the proposed algorithm. The result suggests that the method can be used to estimate suitable values of model parameters for a complex mathematical model.